BACK

Incensers - TRB-130


Technical information unavailable. Please contact the support line for technical information

Enquiry

or call: (39) 0861 753521

Tech Sheet

Enquiry

TRB-130

If and when necessary, the incenser kit can be removed and used in the traditional manner. The incense burns with just the simple touch of a switch. A single incense load can allow 5/6 incense cycles each lasting about 3 - 5 minutes. The kit is available in two different sizes and colours (120 – 130) -  (old or black).

SIMPLE AND SAFE

The Belltron Kit TRB-130 for traditional incensers gives out a plentiful amount of smoke with an intense aroma of incense without using charcoals. After inserting a few grains of incense simply press the start button and in a few seconds the incense will start to burn thanks to the heating element which is limited to a temperature of 500°.  A single incense load can allow 5/6 incense cycles each lasting about 3 minutes.

 

 

CONFORMS TO THE BISHOP’S CERIMONIAL

The traditional incensers using the Belltron Kit  conform to the requirements of the cerimonial of bishops n. 90  which states that it is necessary to add incense to an incenser until it emits smoke. The incenser using the Belltron kit shuts down automatically after 3 minutes of power. To interrupt before the completion of an incense cycle, simply press the start button again. For a prolonged  incense cycle, press the start button again at the end of the incense cycle.

 

 

TECHNOLOGY AND TRADITION

Incense burns with just to the simple touch of a switch thanks to a heating element which replaces the traditional lit charcoal. For those who wish to maintain their original incense burner, Belltron has manufactured an electronic kit which can replace the charcoal tray inside the incenser. If and when necessary, the incenser kit can be removed and the incenser can be used in the traditional manner.

MADE IN ITALY

 The quality and reliability of Belltron products are tested and safe. Using proprietary technology, which characterizes every single electronic device, Belltron is pleased to offer a distinctive Made in Italy product. The high quality factory made productions promote the good name of the company, which is an excellence for electronics in the ecclesiastical world.

ASSISTANCE

Belltron offers its customers a maintenance service at a 360° range to make their daily work easier. These services include : software that meets specific requirements, system information and simple online ordering constantly available, technical support by qualified Belltron technicians by phone, timely intervention in case of system failure.

QUALITY WARRANTY

Warranty covers the Belltron product from the purchase date from an authorized dealer. The quality and reliability of all Belltron products are tested, thanks to a thorough quality control on every single component made by a dedicated team before they are placed on the market. All our products are conceived, designed and manufactured in Italy entirely in-house.

Dati Aziendali

Sede legale: Aeris elettronica Srl
Zona Industriale VALLECUPA - 64010 - COLONNELLA (TE) - ITALY
P.Iva/C.F.: 01643200676

Capitale sociale: € 80.000,00 i.v. - CCIAA di Teramo - REA 140706
La società non è in stato di liquidazione. La società non è a socio unico.